Igmp Snooping Filtering; General Settings; Cli Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

6.2.2

IGMP Snooping Filtering

The IGMP Snooping Filter allows users to configure one or some of range or multicast address
to drop or to forward them.

6.2.2.1 General Settings

6.2.2.1.1 CLI Configurations

Node
enable show igmp-snooping filtering
enable configure terminal
configure igmp-snooping filtering
(enable|disable)
configure igmp-snooping filtering
profile STRING
configure no igmp-snooping filtering all
configure no igmp-snooping filtering
STRINGS
config-igmp type (deny|permit)
Command
86
Description
This command displays the IGMP snooping
filtering configurations.
This command changes the node to
configure node.
This command enables/disables the IGMP
snooping filtering profiles on the Switch.
This command creates a filtering profile and
enters the IGMP snooping filtering profiles
configuration node.
This command removes all of the IGMP
snooping filtering profiles from the Switch.
This command removes the IGMP snooping
filtering profiles by name from the Switch.
This command configures the type of deny
or permit for the group.