Bridge Parameters; Cli Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

VLAN
Apply
Refresh
Instance and vlan map table
Instance
VLAN
Priority
Action

6.14.4.2 Bridge Parameters

6.14.4.2.1 CLI Configurations

Node Command
enable show spanning-tree mst
configuration
enable show spanning-tree mst
instance <0-63> interface
IFNAME
enable configure terminal
configure spanning-tree mst forward-
time <4-30>
configure no spanning-tree mst
forward-time
configure spanning-tree mst hello-
time <1-10>
configure no spanning-tree mst hello-
time
configure spanning-tree mst max-age
<6-40>
configure no spanning-tree mst max-
age
configure spanning-tree mst max-hops This command configures the maximum hop
the root switch. Enter a value from 0~61440.
The lower the numeric value you assign, the higher the priority for
this bridge.
Priority determines the root bridge, which in turn determines the Root
Hello Time, Root Maximum Age and Root Forwarding Delay.
Select one or more vlans which will join the instance.
Note: the vlan will be removed from instance 0 automatically.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
The instance.
The vlan in the instance.
The field displays the priority for the instance.
Click Delete button to delete this instance.
This command displays the MSTP configurations.
This command displays specific instance
configurations on an interface of the MSTP.
This command changes the node to configure
node.
This command configures the forward time for
the MSTP.
This command resets the forward time for the
MSTP.
The default forward delay time is 15 seconds.
This command configures the hello time for the
MSTP.
This command resets the hello time for the MSTP.
The default hello time is 2 seconds.
This command configures the maximum age time
for the MSTP.
This command resets the maximum age time for
the MSTP.
The default maximum age time is 20 seconds.
230
Description