Cli Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

0x0518 1 word
0x0519 1 word
0x051a 1 word
0x051b 1 word
0x051c 1 word
0x051d 1 word
0x051e 1 word
0x051f 1 word
0x0520 1 word
0x0521 1 word
6.10.1

CLI Configuration

Node Command
enable show modbus-tcp
state
enable show modbus-tcp
register-addr range
NUMRANGE
enable configure terminal
configure modbus-tcp
(disable|enable)
Word 0 Lo byte = MAC0
Word 0 Hi byte = MAC1
Word 1Lo byte = MAC2
Word 1 Hi byte = MAC3
Word 2Lo byte = MAC4
Word 2 Hi byte = MAC5
HEX Primary Port of the Xpress-ring1
Word 0 Hi byte = Port ID.
HEX Secondary Port of the Xpress-ring1
Word 0 Hi byte = Port ID.
HEX Primary Port of the Xpress-ring2
Word 0 Hi byte = Port ID.
HEX Secondary Port of the Xpress-ring2
Word 0 Hi byte = Port ID.
HEX Role of Xpress-ring1
0x0000 :
0x0001 :
HEX Role of Xpress-ring2
0x0000 :
0x0001 :
HEX Primary Port Status of Xpress-ring1
0x0000 : link down
0x0001 : forwarding
0x0002 : blocking
HEX Secondary Port Status of Xpress-ring1
0x0000 : link down
0x0001 : forwarding
0x0002 : blocking
HEX Primary Port Status of Xpress-ring2
0x0000 : link down
0x0001 : forwarding
0x0002 : blocking
HEX Secondary Port Status of Xpress-ring2
0x0000 : link down
0x0001 : forwarding
0x0002 : blocking
This command displays the current Modbus TCP
configurations.
This command displays the range of the Modbus TCP
registerations.
This command changes the node to configure node.
This command disables / enables the Modbus TCP on
the switch.
176
Forwarder
Arbiter
Forwarder
Arbiter
Description