Port Settings; Cli Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

7.1.1.2 Port Settings

7.1.1.2.1 CLI Configurations

Node Command
enable show dhcp-snooping
enable configure terminal
configure interface IFNAME
interface dhcp-snooping host count
<1-32>
interface no dhcp-snooping host count
interface dhcp-snooping trust
interface no dhcp-snooping trust
configure interface range
gigabitethernet1/0/PORTLISTS
if-range dhcp-snooping host count <1-
32>
if-range no dhcp-snooping host count
if-range dhcp-snooping trust
if-range no dhcp-snooping trust
Description
This command displays the current DHCP
snooping configurations.
This command changes the node to configure
node.
This command enters the interface configure
node.
This command configures the maximum host
count for the specific port.
This command configures the maximum host
count to default for the specific port.
The default host count is 32.
This command configures the trust port for the
specific port.
This command configures the un-trust port for
the specific port.
This command enters the if-range configure
node.
This command configures the maximum host
count for the specific ports.
This command configures the maximum host
count to default for the specific ports.
The default host count is 32.
This command configures the trust port for the
specific ports.
This command configures the un-trust port for
the specific ports.
252