Cli Configuration; Web Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

When the Switch gets the option 66 and 67 information, it downloads the configuration

file from TFTP server automatically.
The Switch will take effect the configuration file immediately.

If the configuration file has an auto-back command, the Switch backups the current system

configuration to the TFTP server automatically.
Notice: The auto-backup command should be the last command in the configuration file.

6.4.1.1 CLI Configuration

Node Command
enable show dhcp-options
enable configure terminal
configure dhcp-options option_66_67
(disable | enable)
configure dhcp-options option_66_67
auto-backup
configure dhcp-options option_66_67
auto-backupfile
FILENAME

6.4.1.2 Web Configuration

Parameter
DHCP Option 66 & 67 Settings
State
TFTP IP
TFTP File Name
This command displays the configurations and
status for the DHCP option 66 and 67.
This command changes the node to configure node.
This command disables / enables the DHCP option
66 and 67 on the Switch.
This command uploads the current configurations
to TFTP server. The file name is
vcmsh_config_MODEL-NAME_MAC if you
didn't specifiy a filename for it.
This command configures a filename for the auto-
backup function.
Description
Select this option to enable / disable the DHCP option 66 and 67
on the Switch.
The TFTP server's IP address gotten from the DHCP option 66.
The configuration filename gotten from the DHCP option 67.
144
Description