Web Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

ptp_config_port end

6.11.7.2 Web Configuration

Parameter Description
Port Settings
Selects a domain ID to configure.
Domain ID
Selects a port to join the domain.
Port
Enable - enables PTP port in domain as acceptable master.
Acceptable Master
Disable - deletes PTP port in domain from acceptable master list.
Add - configures synchronization interval of PTP port as specified
value.
Sync Interval
Default - deletes existing synchronization interval from PTP port
and adds default value (0).
one step as "ptp_config" node.
This command provides command prompt as
"enable" node.
196