Table of Contents
Advertisement
Viewing result details
Chapter 11
To see a complete listing of all measurements for any completed Fiber Autotest,
press the Details button while at the Fiber Autotest Result screen.
You may need to scroll the list to see all of the parameters in the Test Data
window. Use the
key to scroll the list.
Each measurement is listed together with a summary result.
Passing results are marked with a green check.
·
·
Failing results are marked with a red "X".
Measurement results not used in determining overall pass/fail status
·
are marked to signify that these results are for information only.
The parameters listed on this screen may include:
·
Loss measurements at available wavelengths
·
Length measurements
·
Delay measurements
·
Individual network certification results
The detailed information about the selected parameter will appear in the Data
Table at the top of the Fiber Test Data screen.
Data Table
Currently selected
parameter
highlighted in dark
blue
Running Fiber Autotest 97
Advertisement
Table of Contents
