Table of Contents
Advertisement
Starting the Fiber Autotest
Chapter 11
Running a Fiber Autotest
Make sure that you have attached the correct fiber test probes and configured the
proper settings.
To start an Autotest from the Fiber Main Menu screen, press
This brings up the Fiber Autotest Setup screen. If you need to, you can review
settings from this screen before you start the Autotest. Press
Test.
The procedures for running a single ended and double ended fiber autotests
differ slightly as the following sections describe.
Chapter 11
or Autotest.
again or Start
Running Fiber Autotest 91
Advertisement
Table of Contents
