Table of Contents
Advertisement
Chapter 15
Each of these modules has a separate serial number. You should verify that both
of the cable test modules have the same hardware revision number.
Use the tabs along the top of the screen to switch between viewing WireScope
350 and DualRemote 350 information.
Save to: Storage Location
This setting allows you to choose where to save test results.
If a CompactFlash™ memory card is inserted, the default choice is to
save test results to the CompactFlash™ card.
Otherwise, the default choice is to save results to the internal flash
memory.
Select the current test results storage icon and press
change the test result storage setting.
For more information about memory management and settings, please refer to
Chapter 7.
Power
The power status screen shows the state and charge status for the WireScope
350 battery and the last known charge status of the DualRemote 350.
From the System Settings screen, select Power and press
button.
Pressing the DualRemote tab shows the last known charge status of the
DualRemote 350.
or the Edit button to
or the View
WireScope 350 System Settings 128
Estimated
remaining run
time
Advertisement
Table of Contents
