Table of Contents
Advertisement
NOTE:
Chapter 4
To create a new profile, press Create New Profile and press
Enter a name for the new settings profile and press
Select which settings to include in the setting profile by checking the boxes next
to the corresponding settings.
If one or more profiles were present, theUpdate Selected and Delete choices
would be added to the first Profile Setup screen (in addition to Create New
Profile and Select Existing Profile).
To select an existing profile press Select Existing Profile; then press the
profile name displayed (My Cat 6 in the example screen) and press
Next. The display returns to the Autotest Settings screens and lists the profile
you selected.
To update an existing profile press the profile name desired (My Cat 6 in the
example), then press Update Selected, and press
continue as for a new profile, but include the existing parameters which you
can change, as needed.
To delete an existing profile first select the profile; then press Delete. You
will be prompted to confirm your choice to continue with Delete.
To upload a profile from CompactFlash™ card, see page 115.
or Next.
or Next to continue.
or Next. The screens
Preparing to Run an Autotest 41
or
Advertisement
Table of Contents
