Viewing result details
Chapter 5
To see a complete listing of all measurements for any completed autotest, press
the Details button while at the Autotest summary results screen.
You may need to scroll the list to see all of the measurements in the Test Data
window. Use the
key to scroll the list.
Each measurement is listed together with a summary result.
·
Passing results are marked with a green check.
Failing results are marked with a red cross.
·
·
Measurement results not used in determining overall pass/fail status
are marked to signify that these results are for information only.
Particularly in the case of failing measurements, you may want to see more
detailed information. The WireScope 350 can present test result data in a variety
of formats, depending on the type of data:
·
Summary worst case data only
·
Frequency plots
Locator plots
·
Running an Autotest 51