Table of Contents
Advertisement
NOTE:
General
CAUTION:
Appendix A
If this equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired and successful
operation can not be guaranteed.
Size
Each unit: 9.125" x 4.625" x 2.625" HWD (23.17 x 11.75 x 6.66 cm)
Weight
Each unit: 2.86 lbs. (1.3 kg)
Power
A removable rechargeable Nickel Metal Hydride (NiMH) battery pack typically
provides 9 hours of operation between charges, depending on use and power
management settings. An internal fast charger recharges the NiMH battery pack
in less than 5 hours. Extra battery packs are available.
Battery pack specification: (Part Number N2605A-135) 7.2 VDC 3800 mAh
Power converter: External AC to DC power converter (Part Number N2595A-
110 for 110 VAC models, Part Number N2595A-210 for 220 VAC models)
supplies 12 VDC, 1.2 A to the WireScope 350 or DualRemote 350 power
connector. Power connector polarity: Positive (+) on the outer sleeve; Negative
(-) on the tip.
Use only the 12V charger/adapter supplied with your WireScope and
DualRemote. Using an incompatible charger/adapter can damage your
WireScope equipment and void your warranty.
Display
6.625" (16.83 cm) diagonal backlit color LCD. Resolution: 240 (H) x 640 (V).
The display is capable of displaying text and graphics in up to 256 colors.
SmartProbe test port
Attachment point for test probes. Interface contains high performance signal
channels for measurement functions and two-way control interface for reading
and controlling active test probes.
Appendix A
Specifications
Specifications 139
Advertisement
Table of Contents
