Chapter 4
Storage Setup setting
This setting allows you to choose where to save test results.
If a CompactFlash™ memory card is inserted, the default choice is to
save test results to the CompactFlash™ card.
Otherwise, the default choice is to save results to the internal flash
memory.
Select the test results storage icon and press
the test result storage setting.
Operators setting
Usually, a two-person team operates the WireScope 350. You can store the
names of both the main unit operator and the remote unit operator in each test
record.
You can also store information about which end of the cable run each unit tested
(for example: main unit in telecom closet and remote unit at user location).
Select the Operators icon and press
operator information.
Enter the name of each operator and the location where he or she is testing. This
information is captured automatically and stored in each saved autotest file.
Press
or OK to return to the Autotest Settings screen.
or the Edit button to change
or the Edit button to enter or change
Preparing to Run an Autotest 38