Key/Bid Label (Key Code) - GE 9100c Technical Reference Manual

8.1.1 Key/BID label
(Key Code)
M1207026
M1207027
Reproduced from the electronic master in MATRIX
The replacement Display Monitor Board includes a Key/BID label that
is appropriate for machines that include all of the optional features. If
the machine includes only some of the optional features, access the
Key Code Generator web site to obtain the appropriate optional
features Key Code.
1. Gather the following information (* denotes Required
Information):
Requestor Information
* Email Address
* Full Name
* Organization
End User Information
Hospital Name
Address 1
Address 2
City
Postal Code
Country
Telephone
Information from the EXISTING Control Board being REMOVED
* Control Board ID number
* Control Board Key Code
Information from the REPLACEMENT Control Board being
INSTALLED
* Control Board ID Number
The Control Board here only refer to the replacement Display Monitor
Note
Board for the 9100c system. The replacement Control Sample Board
doesn't need the appropriate optional features Key Code.
2. Access the Key Code Generator on the following web site.
• http://www.docodes.com
3. Enter the required information and Submit the Request.
An e-mail with the replacement Display Monitor Board Key Code will
be immediately sent to the e-mail address provided (due to delays in
some firewalls and internet traffic, responses can take up to 24 hours
to receive).
Note: For traceability, the Global Service and Support Helpdesk is
copied on the email.
004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English
8 Software Installation
8-3