Connections And Indicators - adept technology MV User Manual

Chapter 6

Connections and Indicators

VGB
OK
V
I
D
E
O
B
U
S
M
O
N
I
T
O
R
1
2
3
4
P
O
I
N
T
E
R
KEYBOARD
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
OK LED indicates that this board has passed its start-up
test.
Video Bus connector — a 26-pin mini D-sub connector for
installing one end of the video bus connector in
AdeptVision systems. The other end of the connector
connects to the EVI board. (Not used in nonvision
systems.)
Monitor connector — a 15-pin female mini D-sub
connector for the color monitor. See
LEDs 1 to 4 are for Adept Service use only.
DIP Switch (4 position) — see
Pointer connector — a 9-pin male D-sub connector for the
pointer cable from the Adept integrated
keyboard/trackball. Can also be used for a mouse or
touchscreen. See
Keyboard connector — a 5-pin female DIN connector for
the keyboard cable from the Adept integrated
keyboard/trackball. See
On a graphics-based system, the V
NOTE:
monitor window is normally displayed on the
monitor connected to the VGB board. However, you
can redirect the system monitor input/output to the
RS-232/Term port on the processor board.
Adept MV Controller User's Guide, Rev. B

Connections and Indicators

page
Table 6-1
page 137 for details.
page 136 for details.
135.
for functions.
+
system
133