Table of Contents
Advertisement
Chapter 7
Camera Cable Pin and Signal Information
This section provides the pin and signal information for the connectors and cables
associated with the AdeptVision product.
•
Table 7-7
describes the Hirose connector that is used for all cameras except
the Pulnix TM-1001 on the camera breakout cables.
•
Table 7-8
describes the Hirose connector that is used for the Pulnix TM-1001
on the custom four-camera breakout cable.
•
Table 7-9
describes the Strobe and Power connector on the Pulnix TM-1001
camera cables.
•
Table 7-10
•
Table 7-11
camera and strobe/power connectors for the four-camera breakout cable. The
table is organized by camera number.
•
Table 7-12
camera and strobe/power connectors for the Pulnix TM-1001 custom
four-camera breakout cable. The table is organized by camera number.
•
Table 7-13
numerically by the 44-pin connector.
•
Table 7-14
numerically by the 44-pin connector.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
describes the 10-meter camera extension cable.
describes signal information between the 44-pin connector and the
describes signal information between the 44-pin connector and the
contains information similar to
contains information similar to
Adept MV Controller User's Guide, Rev. B
Camera Cable Pin and Signal Information
Table
7-11, but it is organized
Table
7-12, but it is organized
155
- Quick Links:
- Developer's Manuals
Hide quick links:
Advertisement
Table of Contents
