Custom Pulnix Tm-1001 D-Sub To Bnc Adapter Cable - adept technology MV User Manual

Chapter 7

Custom Pulnix TM-1001 D-sub to BNC Adapter Cable

This cable has a 9-pin D-sub connector on one end and four Video and Sync BNC
connectors and power connectors at the other end. The cable length is 1.54 meters
(60 inches).
9-pin
9-pin
D-sub
D-sub
Connector
Connector
Figure 7-6. D-sub Adapter Cable for Pulnix TM-1001
150
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
D-sub Auxiliary Connector Pin Assignments
D-sub Auxiliary Connector
Pin Signal
Pin Assignments
1
User +12V to cameras
Pin Signal
1 User +12V to cameras
2 User power return (Gnd)
2 User power return (Gnd)
3 Strobe 1
3 Strobe 1
4 Strobe return (Gnd)
4 Strobe return (Gnd)
5 Strobe 2
5 Strobe 2
6 Frame reset 1
6 Frame reset 1
7 Frame reset return (Gnd)
8 Frame reset 2
7 Frame reset return (Gnd)
9 Shield (chassis ground)
8 Frame reset 2
9 Shield (chassis ground)
Adept MV Controller User's Guide, Rev. B
Red
Red
Orange
Orange
Black
Black
White
White
Yellow
Yellow
Gray
Gray
Camera Cables
Strobe
Strobe
Frame Reset 1
Frame Reset 1
Strobe
Strobe
Frame Reset 2
Frame Reset 2
Power
Power
Ground
Ground