Optional Equipment; Compact Interface Panel (Cip); Manual Control Pendant (Mcp); Adeptwindows - adept technology MV User Manual

Chapter 2

Optional Equipment

Compact Interface Panel (CIP)

The CIP is an external control panel that can be added to an Adept controller
system. The CIP connects to the AWC board. It includes the basic hardware
interface, as well as connections for:
• Remote emergency stop circuitry
• Remote front panel circuitry
• 40 digital output signals
• 44 digital input signals
• One serial I/O connector
• The Manual Mode Safety Package (MMSP)
• DeviceNet


See for details.

Manual Control Pendant (MCP)

The Manual Control Pendant (MCP) is a hand-held control unit that can be added
to any Adept controller system that includes a CIP. The MCP connects to the front
of the CIP. The pendant has a palm-activated MCP enable switch connected to the
remote emergency stop circuit.
The MCP is often used to manually control a robot or motion device during
system development. The MCP includes function keys and a 2-line by
40-character LCD display that are fully programmable. An Emergency Stop push
button switch on the MCP shuts off High Power at the Adept controller. See


for details.

AdeptWindows

AdeptWindows is an application suite for the personal computer (PC) that
provides additional capabilities for the Adept controller and an interface to the
    
PC. See the
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
for details.
Adept MV Controller User's Guide, Rev. B

Optional Equipment

43