Shipping, Storage, Unpacking, And Inspection; Shipping And Storage; Before Unpacking; Upon Unpacking - adept technology MV User Manual

Chapter 3

Shipping, Storage, Unpacking, and Inspection

Shipping and Storage

This equipment must be shipped and stored in a temperature-controlled
environment, within the range –25°C to +55°C. The recommended humidity
range is 5 to 90%, nonconducting. It should be shipped and stored in the
Adept-supplied packaging, which is designed to prevent damage from normal
shock and vibration. You should protect the package from excessive shock and
vibration.

Before Unpacking

Carefully inspect all shipping crates for evidence of damage during transit. Pay
special attention to tilt and shock indication labels on the exteriors of the
containers. If any damage is indicated, request that the carrier's agent be present
at the time the container is unpacked.

Upon Unpacking

Compare the actual items received (not just the packing slip) with your
equipment purchase order, and verify that all items are present and that the
shipment is correct. Inspect each item for external damage as it is removed from
its container. If any damage is evident, contact Adept at the numbers listed in
"How Can I Get Help?" on page
Retain all containers and packaging materials. These items may become necessary
to settle claims or, at a later date, to relocate equipment.

Repacking for Relocation

If the controller needs to be relocated, reverse the steps in the installation
procedures that follow this section. Reuse all original packing containers and
materials and follow all safety notes used for installation. Improper packaging for
shipment will void your warranty.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
34.
Adept MV Controller User's Guide, Rev. B

Shipping, Storage, Unpacking, and Inspection

49