Led Status Indicators On The Awc - adept technology MV User Manual

Chapter 4

LED Status Indicators on the AWC

The LEDs on the front of the AWC give the following information about the status
of the main AWC CPU.
O = Off G = Green
LED Display
1 2 3
O-O-O
O-O-R
O-R-O
O-R-R
R-O-O
R-R-O
G-O-O
G-O-G
If the AWC displays any of the above errors, contact Adept Customer Service.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
R = Red
Table 4-10. LED Status Indicators
Error # Description
0 No error.
System clock is dead or too fast. Clock interrupts
1
are not being received.
Hardware configuration error. Address
2
switches/SYSCTL wrong.
3 Graphics board failure. VGB not responding.
4 Memory test failure. Free storage error.
6 Software serial I/O configuration error.
C Uninitialized trap.
D Bus error detected.
Adept MV Controller User's Guide, Rev. B
AWC Module Serial I/O Ports
85