Configuration And Status Reports - 3Com NBX 100 Administrator's Manual

Configuration and
Status Reports
Table 69 3C10165D and 3C10116D Status Lights and Error Conditions
Status Light Purpose
CO Green: There are no error or alarm conditions.
Amber: An alarm condition at the remote end or the CO is
not connected or available. To determine which alarm state
exists:
1 Log on to the NBX NetSet utility using the administrator ID
2 Click Device Configuration > Digital Line Cards.
3 In the Select Device Type list, select T1 Span List or ISDN
4 Select the span you want and click Status. The words Red
You can obtain the status of all Digital Line Cards in the NBX system with
either of these two methods:
Select NBX NetSet > Device Configuration > Digital Line Cards and:
Click Config & Status Report. The formatted report appears on the
screen with headings shown in a larger font.
Click Export Report. The unformatted report appears on the screen. To
save the report as an ASCII text file, select Save as from the File menu
of your browser.
Table 70 describes in alphabetical order (not the order of appearance) the
headings in the Configuration and Status Report.
Table 70 Configuration and Status Report Headings
Heading Description
#Chs Number of channels.
#Dsp Number of digital signal processors.
#OffChs Number of channels in the offline state.
#OnChs Number of channels in the online state.
AEClosed Autoattendant extension when business is closed.
AELunch Autoattendant extension when business is at lunch.
AEOpen Autoattendant extension when business is open.
AEOther Autoattendant extension for Other hours.
System-level Troubleshooting
and password.
PRI Span List, and then click Apply.
Alarm or Blue Alarm appear in the Status field.
379