3Com NBX 100 Administrator's Manual page 395

Table 73 Completion Cause Codes (continued)
Hex
Class Grouping Code
0x2D
0x2F
Service or option 0x31
not available
0x32
0x34
0x36
0x39
0x3A
0x3F
Service or option 0x41
not implemented
0x42
0x45
0x46
0x4F
Invalid message 0x51
Decimal
Code Description
45 Pre-empted
47 Resources
unavailable –
unspecified
49 Quality of
service
unavailable
50 Facility not
subscribed
52 Outgoing call
barred
54 Incoming call
barred
57 Bearer
capability not
authorized
58 Bearer
capability not
available
63 Service not
available
65 Capability not
implemented
66 Chan not
implemented
69 Facility not
implemented
70 Only restricted
digital available
79 Service not
implemented,
unspecified
81 Invalid call
reference
Details
Reports a resource unavailable event only when no other
cause in the resource unavailable class applies.
Throughput or transit delay cannot be supported and that
the Quality of Service (as defined in Recommendation
X.213) cannot be provided.
The requested supplementary service could not be provided
by the network because the user has not completed the
necessary administrative arrangements with its supporting
networks.
The user is trying to make unauthorized use of equipment
providing a bearer capability.
The user has requested a bearer capability, which is
implemented by the equipment generating the cause, but
is not available at this time.
Reports a service (or option) not available event only when
no other cause in the service (or option) not available class
applies.
The equipment sending this cause does not support the
requested bearer capability.
The equipment sending this cause does not support the
requested channel type.
The equipment sending this cause does not support the
requested supplementary service.
One equipment has requested an unrestricted bearer
service but the equipment sending this cause only supports
the restricted version.
Reports the service (or option) not implemented event only
when no other cause in the service (or option) not
implemented class applies.
The equipment sending this cause has received a message
with a call reference that is not currently in use on the user
network interface.
395