Details - 3Com NBX 100 Administrator's Manual

348 C 8: O
HAPTER PERATIONS

Details

U.S. English cannot be removed.
When you remove a version of system software, the system verifies
whether the removal might leave any regional software unassigned to a
system software version.
Specific regional languages, tones and cadences, or voice prompts that
were associated with earlier releases may no longer be usable by recent
system software versions. 3Com recommends that you purge unused
regional software to conserve disk space.
You can only remove unused regional software immediately after you
delete a version of system software. If you choose not to remove this
software when prompted, you must either:
Wait until you remove a subsequent version of system software before
you can delete any unused regional software.
Remove all versions of the selected regional software on the system.
You can then install the required version.
The Regional Software Diagnostic Details window displays the status of
each region in the current system software.
displayed values.
Table 64 Diagnostic Details
Values
In Use
Available
Not Fully Installed
Error While Loading
Nothing Installed
Description
The regional software is currently being used by the system.
The regional software is fully loaded on the system, but it is
not currently in use.
The system can access some parts of the regional software,
but not all. You probably have not loaded the correct
regional software version for the system software you are
running.
An error occurred while loading the regional software.
Re-install the software.
The system is aware that this regional software exists, but no
version is installed.
Table 64 defines the