3Com NBX 100 Administrator's Manual page 370

370 C 11: T
HAPTER ROUBLESHOOTING
Table 66 LUI Menu Items (continued)
Menu Option Description
8 Test LED & LCD On all NBX Business Telephones and NBX 3101 and 3101SP
Basic Telephones, turns on all LEDs for 5 seconds, then fills every
pixel on the display panel for 5 seconds.
On all NBX Basic Telephones, turns on the icons and words on
the right side of the display panel for 5 seconds.
Icons: Telephone icon plus the number 1 (top line) and
telephone icon plus the number 2 (bottom line)
Words: FWD (top line) and IN (bottom line)
9 Test – Buttons Puts the telephone in the button test state. Press any telephone
button to see a description of the button's function. To return to
the main menu, you must press the menu button twice:
0 Restores the phone to default settings by clearing these
EEPROM-Default configured settings:
IP Information — My IP, Subnet Mask, Gateway IP, NCP-IP, and
the Alt Download Server IP return to 255.255.255.255.
NCP MAC address — The NCP MAC address returns to
ff:ff:ff:ff:ff:ff.
SIP Parameters — All SIP specific parameters will be set to
default 0xffff (data parameters) or 255.255.255.255 for IP
addresses.
NOTE: If you select this option you are prompted to verify your
action before the system clears the EEPROM.
AB1 Set NCP Lets you specify the MAC address of the Network Call Processor.
MAC In all but special circumstances, the system messages
communicate this information and you do not need to manually
NOTE: This
configure the MAC address.
setting is for test
networks only. To change a telephone back to its default setting, enter all Fs for
the NCP MAC address.
On 3102 Business Telephones:
On 1102, 2102, or 2102-IR Business Telephones:
On 3101 or 3101SP Basic Telephones or 3103 Manager's
Telephones:
On 2101 Basic Telephones:
On 3106C or 3107C Cordless Telephones, *.