Customer Service; Reboot/Shutdown - 3Com NBX 100 Administrator's Manual

Customer Service

Reboot/Shutdown

provide you with license keys equivalent to those that were associated
with the replaced disk tray.
If you have an NBX V3000 system and you need to replace the main
system chassis for any reason, you must provide a valid license backup file
to your 3Com NBX Voice-Authorized Partner. This file enables them to
provide you with license keys equivalent to those that were associated
with the replaced chassis.
Licenses for Future Releases
If you purchase a license for a future NBX software release, all software
releases up to that version are included. For example, if you purchase a
license for release R5.0 and you are currently running R4.2, you can
upgrade to any R4.X release without the need to purchase an additional
license.
Downgrading to Previous Releases
If you are running R4.2 with a valid system software license and you want
to downgrade to a previous, unlicensed software version (for example,
R4.0 or R4.1) you can do so by rebooting to the previous version. No
other action is required.
If you reboot to R4.2 without installing a valid license, and you run your
system with the restrictions in place (see
page 336), 3Com Customer Service cannot access the information
required to help you with problems. To obtain assistance from 3Com
Customer Service, you must either reboot to a previous version of the
NBX system software or install a license for R4.2.
You must reboot the system after you upgrade software. You must shut
down the system software before you turn off power to your NBX
system.
To reboot or shutdown the system:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click Operations > Reboot/Shutdown. See the Help for procedures on
rebooting and shutting down the system.
Reboot/Shutdown
"Restricted Operation"
337
on