Activating Option - 3Com NBX 100 Administrator's Manual

Activating Option

184
c Click Add.
5 Repeat steps 4 a, b, and c for each element in the following table. As you
add each element, it appears in the Current values list, above previously
added values.
Add these elements in this order:
Table 74
What You Type Description
1
4
NOTE: The next four fields use 10.234.1.254 as the sample IP address of the
NBX Call Processor. Enter the IP address of your NBX Call Processor.
10
234
1
254
6 After you have entered all elements in the new value, click OK. You return
to the Predefined Options and Values dialog box. The values that you
entered appear in the Value area of the dialog box under Byte.
The values appear in hexadecimal format although you entered them in
decimal format.
7 To accept the values, click OK. You return to the DHCP Microsoft
Management Console dialog box.
To activate option 184, decide whether you want to apply the option to a
specific scope or globally, that is, to all scopes that are served by the
DHCP server software.
To activate option 184 for a specific scope:
1 In the left pane of the DHCP Microsoft Management Console dialog box,
find the scope that you want. Then highlight Scope Options.
2 Right click Scope Options, and, from the menu that appears, select
Configure Options. The Scope Options dialog box appears.
Enter 1 as the only suboption code for option 184. (Some
options can have more than one suboption.)
The length of the argument that applies to this suboption.
For option 184, suboption 1, the argument is an IP address,
which is composed of four numerical fields (octets).
The first octet in the IP address of the NBX Call Processor.
The second octet in the IP address of the NBX Call Processor.
The third octet in the IP address of the NBX Call Processor.
The fourth octet in the IP address of the NBX Call Processor.
Activating Option 184 401