Removing A Line Card Port; Verifying Line Card Port Status; Rebooting A Line Card Port; Advanced Settings - 3Com NBX 100 Administrator's Manual

Removing a
Line Card Port
Verifying Line Card
Port Status
Rebooting a
Line Card Port

Advanced Settings

5 Click OK.
When you remove a line card port that is already configured, you remove
the port information from the database.
To remove a line card port:
1 Select NBX NetSet >
2 Select the port that you want to remove from the list.
3 Click Remove. A prompt asks you to confirm that you want to remove the
port.
4 Click Yes to remove the port.
You can verify the status of a configured line port at any time.
To view the status of a line card port:
1 Select NBX NetSet >
2 Select the port that you want and click Status.
Click the Help button to see more information about the dialog box
fields.
To reboot a line card port:
1 Select NBX NetSet >
2 From the list, select the port that you want to reboot.
3 Click Status. The Device Status dialog box appears.
4 Click Reset Device.
5 Click .
OK
CAUTION: On the 3C10117 Analog Line Card, you can reboot individual
ports without affecting the other ports. However, if you reboot a port on
the 3C10114C Analog Line Card, all four ports on the card are rebooted.
Active telephone calls on any of these ports are disrupted.
The Advanced Settings button enables you to set the audio gain and
timing controls on each port of an Analog Line Card.
Configuring and Managing Analog Line Card Ports
Device Configuration
Device Configuration
Device Configuration
> Line Card Ports.
> Line Card Ports.
> Line Card Ports.
165