Viewing Attendant Console Status; Removing An Attendant Console; Configuring Attendant Console Buttons - 3Com NBX 100 Administrator's Manual

Viewing Attendant
Console Status
Removing an
Attendant Console
Configuring
Attendant Console
Buttons
3 Change the desired fields. Click the Help button to see more information
about the dialog box fields.
4 Click Apply to make the changes and then click OK.
Use the Status button on the Attendant Console tab to check the status
of an Attendant Console. You can also reboot it from this tab with the
Reset Device option.
To view the status of an Attendant Console:
1 Select NBX NetSet >
2 Select the Attendant Console for which you want to view the status and
click Status. The Device Status dialog box appears.
3 View the settings and optionally change the Dialog Refresh, Device
Refresh, and Reset Device settings. Click the Help button to see more
information about the dialog box fields.
4 Click Apply to apply the settings and then click OK.
To remove an NBX Attendant Console from the system:
1 Select NBX NetSet >
2 Select the Attendant Console that you want to remove.
3 Click Remove. A dialog box prompts you to confirm the removal.
4 Click Yes. The system removes the Attendant Console.
This section describes how to configure the buttons on the NBX
Attendant Console. The Attendant Console buttons include:
50 Access buttons. You can assign each button two settings.
A Shift button. This button switches between the two settings
allowed for each Access button.
Four Feature buttons.
Configuring the NBX Attendant Console
Device Configuration
Device Configuration
> Attendant Console.
> Attendant Console.
159