3Com NBX 100 Administrator's Manual page 360

360 C 11: T
HAPTER ROUBLESHOOTING
Restart the telephone
Early model NBX Telephones support an earlier version of the LUI utility
that has a slightly different menu. For information on this earlier version
of the LUI utility, see your NBX Voice-Authorized Partner or a version of
the NBX Administrator's Guide from a release prior to NBX R4.3.
To start the LUI utility:
1 Cycle power to the telephone by disconnecting and then reconnecting its
power connector, and then start the LUI utility (as described in
next) before the telephone finishes its download of code from the call
processor.
For telephones that use a powered Ethernet cable instead of a power
adapter, disconnect and then reconnect the Ethernet cable.
2 To start (or exit from) the LUI utility:
On the 3102 Business Telephone, press the Program button:
On 1102, 2102, or 2102-IR Business Telephones, press Program:
On 3103 Manager's Telephones and 3101 or 3101SP Basic Telephones,
press the center button in the cursor control button group:
On the NBX 2101 Basic Telephone, press the MSG button:
On 3106C and 3107C Cordless Telephones, press the Feature button:
The buttons you use to enter information vary with each telephone:
3103 Manager's Telephone, see on
3102 Business Telephone, see
3101 or 3101SP Basic Telephones, see
Figure 27.
Figure 28 on page 362.
Figure 29 on
step 2,
page 363.