3Com NBX 100 Administrator's Manual page 96

96 C 2: D
HAPTER IAL
P
LAN
Figure 14 Example: Virtual Tie Lines Tab
Remote Access Verification
To verify that each system can access the other, on each system:
1 On the Virtual Tie Lines tab, select the VTL and then click the Query
Remote button.
2 In the Query Remote System window, type the IP address of the remote
system in the IP address text box. Click the Query button. If the
verification is successful, the window displays the VTLs configured at the
remote site.
Example: Suppose you have installed an NBX system in Chicago, Atlanta,
and Dallas, and you have configured two VTL connections on each of the
Chicago and Atlanta systems. Also, the IP addresses of the three systems
are:
Chicago — 192.168.15.100
Atlanta — 192.168.25.100
Dallas — 192.168.35.100
If you perform the Query Remote operation from the Chicago system to
the Atlanta system, the results might look like Figure 15.