Adding An Attendant Console; Modifying An Attendant Console - 3Com NBX 100 Administrator's Manual

158 C 3: D
HAPTER EVICE
Adding an Attendant
Console
Modifying an
Attendant Console
C
ONFIGURATION

Modifying an Attendant Console

Viewing Attendant Console Status
Removing an Attendant Console
Configuring Attendant Console Buttons
Changing Attendant Console IP Settings
Before you add Attendant Consoles, keep the following requirements in
mind:
On a NBX V3000 system, you can configure up to 100 Attendant
Consoles.
On a SuperStack 3 NBX system, you can configure up to 100
Attendant Consoles.
On an NBX 100 system, you can configure up to 50 Attendant
Consoles.
You can associate at most 3 Attendant Consoles with any one telephone.
The NBX Model 3105 Attendant Console requires a license. You must
enter a valid device license key into the NBX NetSet utility before you can
add a 3105 Attendant Console to the system.
To add a new NBX Attendant Console:
1 Select NBX NetSet >
2 The Add Attendant Console dialog box appears.
3 Fill in the fields for the new Attendant Console. Click the Help button to
see more information about the dialog box fields.
4 Click OK. The system adds the new NBX Attendant Console.
This section describes how to modify an existing Attendant Console. You
can change an Attendant Console's device number or associated
telephone. Every Console must be associated with a telephone. To modify
an existing NBX Attendant Console:
1 Select NBX NetSet >
2 Select the Attendant Console that you want to modify and click Modify.
The Modify dialog box appears.
Device Configuration
Device Configuration
> Attendant Console.
> Attendant Console.