3Com NBX 100 Administrator's Manual page 37

Leading Digits to Collect
Table Entry ID Number
Table Name
Table ID Number
Command
Table Create 1 Internal
/
/
TableEntry Create
TableEntry Create
Tab
leEntry Create
Table Create 2 Incoming
/
/
TableEntry Create
Tab
leEntry Create
Table Create 3 Least Cost Routing
/
Table 6 Dial Plan Command Fields
Field
Command
Table ID Number
Figure 2 Dial Plan Command Format
Id Entry Digits
1 1 0
1 2 1
1 3 2
Id Entry Digits
2 1 0
2 2 1
Id Entry Digits
Table 6 describes each field of a dial plan command.
Description
Command name. For example, TableEntry Create is the command that makes Class of
Service and call routing decisions based on the correspondence of dialed digits and table
entry digits. See "Dial Plan Configuration File Commands"
description of each command.
Table ID number. This is always 1 for the Internal dial plan table, 2 for the Incoming dial plan
table, and 3 for the Least Cost Routing Table.
Call Classification
with Class of Service
Maximum and Minimum
Characters to Collect
Min Max
1 1
3 3
3 3
Min Max
1 1
3 3
Min Max
Dial Plan Tables
—
Used
Priority
(Not Used)
Class Prio Route
Internal
Internal
Internal
Class Prio Route
Internal
Internal
Class Prio Route
later in this chapter for a
37
Number of the
route (dial tone
facility) from
Routing Tables
0 4
0 0
0 0
0 4
0 0