3Com NBX 100 Administrator's Manual page 118

118 C 2: D
HAPTER IAL
PreTranslatorOperation
Create
Table Create
P
LAN
This command deletes all pretranslator entries from pretranslator 2.
PreTranslatorEntry Delete 2 *
Normally this command is not necessary. It is better to delete an entire
dial plan rather than import a new dial plan over it. To accomplish this,
3Com recommends using specific commands at the top of every dial plan
configuration file. For an example of this technique, see
Plan Configuration Files"
Syntax
PreTranslatorOperation Create nPreTranslatorId nEntryId
nOperId szOperation szValue
Description Creates a digit manipulation operation for a pretranslator
entry. If the specified digit manipulation operation already exists, this
command overwrites it with the new information. During pretranslation,
the system processes the list of operations in ascending
( 1 first).
nOperId
Arguments
nPreTranslatorId
nEntryId — An integer in the range 1 through 32768 specifying the
pretranslator entry to which this operation applies.
nOperId — An integer in the range 1 through 32768. The
system processes the list of operations in ascending nOperId order
( nOperId 1 first).
szOperation — The name of the digit manipulation operation to perform.
Values are: stripLead, stripTrail, replace, prepend, append.
szValue — The value to use in the operation, either the string of digits to
prepend, append, replace with, or the number of digits to strip.
Syntax
Table Create nDialPlanTableId szDescription
Description Creates a dial plan table to control the routing of calls
placed by devices. Dial plan tables apply to internal devices such as
telephones, incoming calls from outside the NBX system, and Least Cost
on page 46.
— An integer in the range 1 through 32768.
"Creating Dial
nOperId order