Adding Or Modifying A Bri Group - 3Com NBX 100 Administrator's Manual

Adding or Modifying
a BRI Group
Modifying a BRI Span
To modify a span:
1 On the Digital Line Cards tab, from the Select Device Type drop-down list,
select ISDN BRI Span List and then click Apply.
2 Select the span you want to modify from the Span List. Click Modify. The
Modify Span dialog box appears.
3 Make the changes that you want. Click the Help button to see more
information about the dialog box fields. The ISDN BRI-ST Digital Line Card
supports two channels per span.
4 Click Apply.
5 Enable the On Line check box to bring the span online. Note that the
span does not come online unless the card is online first.
6 Click Apply to make the changes and then click OK.
Modifying Audio Controls
In a normal environment, you should not need to change the Audio
Controls from their default settings. If you have an issue with sound
quality and you cannot resolve it using the volume controls on the NBX
Telephones, contact your technical support representative.
CAUTION: Do not change your Audio Controls settings unless you are
instructed to do so by a qualified support representative.
A BRI-ST Digital Line Card group is one or more BRI channels that are
assigned the same characteristics. These sections tell you how to perform
these tasks:
Adding a BRI Group
Modifying a BRI Group
Changing BRI Group Membership
Removing a BRI Group
Adding a BRI Group
You add a new group when you need to assign common characteristics
to several BRI channels.
Configuring and Managing BRI-ST Digital Line Cards 177