Date And Time; Timers - 3Com NBX 100 Administrator's Manual

Date and Time

If necessary, you can set the NBX system date and time. It is important
that the date and time are accurate because the system date and time
affect these NBX features:
To set the system date and time:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click System Configuration > System Settings > Date and Time. See the
Help for the procedure on setting the system date and time.

Timers

System timers enable you to set time-out periods for the NBX system
features that are described in
To set timers:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click System Configuration > System Settings > Timers. See the Help for
the procedure on setting timers.
Table 37 System Timers Fields
Field
Forward Voice Mail On
Timeout
Forward Voice Mail Off
Timeout
Line Port Hold Timeout For a call originating on an outside line (Analog Line Card
Call Park Timeout
The NBX telephone display panel
Business hours behavior
Time-dependent prompts in the Auto Attendant
Time and date stamp on voicemail
Purpose
When a telephone's FWD VMAIL button is enabled, this
field specifies the duration of ringing before a call is
forwarded to voice mail.
If you set this time to under 6 seconds, caller
ID information is not captured in voicemail.
When a telephone's FWD VMAIL button is disabled, this
field specifies the duration of ringing before a call is
forwarded to voice mail.
port), the length of time that the call remains on hold
before it rings at the extension that placed the call on hold.
The length of time that a call can be parked before it rings
at the extension that parked the call.
Table 37.
System Settings 263