Status - 3Com NBX 100 Administrator's Manual

306 C 7: NBX M
HAPTER

Status

ESSAGING
Table 52 Systemwide Settings Fields
Field
Enabled
Max Out-calling Ports The number of voice mail ports available for simultaneous
Out-dialing Prefix
To view the status of all voice mail ports on your NBX system, click the
Status button.
In the status window, to reset a voice mail port, select it and click Reset.
Table 53 explains the information in the Status window.
Table 53 Fields in the Status Window
Column
Ext.
Name
Used By
Purpose
Check the box to enable Off-site Notification throughout the
system. By default, Off-site Notification is disabled.
If you select Enabled, you must also enable Off-site
Notification in these locations:
Class of Service Settings. See "Configuring Class of
Service" in Chapter 4.
User's personal settings. See "Off-Site Notification" in the
NBX Telephone Guide.
use by Off-site Notification. This parameter can be
configured up to the number of voice mail ports licensed for
the NBX system. The system ships with 4 ports; you must
purchase an upgrade license to enable additional ports.
A prefix used by every call made by Off-Site Notification.
If this setting is empty, the call uses only the information
specified by the user.
Purpose
The extension associated with the voice mail port.
The name associated with the voice mail port.
The person or device that is using the voice mail port.
Values:
Extension number, name — An internal user is using the
voice mail port. The user's extension number and name
appear in this column.
Auto Attendant — The automated attendant is using the
port.
Blank — The port is not being used. The word Idle
appears in the In Use column.