3Com NBX 100 Administrator's Manual page 246

246 C 4: U
HAPTER SER
C
ONFIGURATION
During the call, the user can enter another valid account code using the
following format:
F+ 888 + Account_code + #
The user can enter multiple account codes during a call; the most recently
entered account code overrides the previously entered account code. In
Verified account code mode, the newest account code only overrides the
existing account code if it has been verified.
The account code and account name information is available in the Call
Detail Reporting (CDR) data that can be enabled in the Reports portion of
the NetSet utility.
Enforcing account codes is applicable for outgoing external calls only.
Forced / Unverified Mode
Forced / Unverified mode is similar to Forced / Verified mode in that the
system forces the phone user to enter an account code. However, since
the account code is not verified, the phone either:
Shows the account name associated with the code.
Shows the text string
In this mode, it is possible for the user to enter an invalid account code
and still proceed with the call.
The account code and account name information is available in CDR.
The system only forces the use of account codes on outgoing, external
calls.
Unforced / Verified Mode
In Unforced / Verified mode, the NBX system does not force the phone
user to enter an account code but, if the phone user does enter an
account code, the NBX system verifies that the account code is correct.
The phone user can enter an account code during the call using the
following format:
Feature + 888 + Account_code + #
Unknown Account.