Configuring Call Park; Adding A Call Park Extension; Changing The Name Of A Call Park Extension - 3Com NBX 100 Administrator's Manual

156 C 3: D
HAPTER EVICE
Configuring Call
Park
Adding a Call Park
Extension
Changing the Name
of a Call Park
Extension
C
ONFIGURATION
When you park a call, anyone can retrieve it from any other telephone in
the system by entering the Call Park extension that is associated with that
call. Example: You need to transfer an incoming caller, but the person
that you need to reach is not available. You can park the call on any
unused Call Park extension and then page the person, announcing the
Call Park extension where the call is parked. The person can then retrieve
the parked call from any internal telephone by dialing the Call Park
extension on which you parked the call.
These are the default system configuration extensions for Call Park:
NBX V3000: 6000 through 6099
The NBX V3000 is shipped with a 4-digit dial plan. If you import any
3-digit plan, you must manually specify any 3-digit extension ranges that
are not set by the imported plan.
SuperStack 3 NBX: 6000 through 6099
The Superstack 3 NBX is shipped with a 4-digit dial plan. If you import
any 3-digit plan, you must manually specify any 3-digit extension ranges
that are not set by the imported plan.
NBX 100: 601 through 609
The NBX 100 is shipped with a factory default 3-digit dial plan. If you
import any 4-digit plan, you must manually specify any 4-digit extension
ranges that are not set by the imported plan.
To add a Call Park extension or change the name of a default Call Park
extension:
1 Select NBX NetSet >
2 Click Add. The Add Call Park dialog box appears. Click the Help button to
see more information about the dialog box fields.
3 Enter the number of an extension you have previously removed in the
Extension field.
4 Enter a name for the extension in the Name field.
5 Click OK.
You can change the name of any Call Park extension.
Device Configuration > Call Park tab.