3Com NBX 100 Administrator's Manual page 116

116 C 2: D
HAPTER IAL
PreTranslator Create
PreTranslatorEntry Create
P
LAN
The default value for a 3-digit system is 750, and for a 4-digit system is
7250. Typically, systems do not use all of the extensions from 600
through 799 (or 6000 through 7999). If, however, the system uses all of
these extensions and needs another one, it starts looking from the
beginning of the range and selects the first unused one.
szDefaultAutoExtension
forwarding incoming calls. This is always 500.
The system must direct each incoming call (on an external line) to an
extension. After you import the dial plan configuration file, and complete
the Auto Discovery process, you can manually configure the extension for
each analog line and each Digital Line Card channel, if you want.
Syntax
PreTranslator Create nPreTranslatorId szDescription
Description Creates a pretranslator. If the pretranslator already exists,
this command removes all of its entries and operations, and overwrites its
description with the new information.
Arguments
nPreTranslatorId
szDescription — The description or name of the pretranslator.
Example: This command creates a pretranslator, designates it as the first
one (number 1) and give it the title "4-to-3-digit DID/DDI pretranslator."
PreTranslator Create 1 4-to-3-digit DID/DDI pretranslator
Syntax
PreTranslatorEntry Create nPreTranslatorId nEntryId szDigits
Description Creates a pretranslator entry and specifies a string of digits
that are compared to the incoming digits. If the pretranslator entry
already exists, this command overwrites it with the new information.
Arguments
nPreTranslatorId
— An integer in the range 1 through 32768.
nEntryId
— The default extension the system uses for
— An integer in the range 1 through 32768.
— An integer in the range 1 through 32768.