3Com NBX 100 Administrator's Manual page 369

Table 66 LUI Menu Items (continued)
Menu Option Description
2 Set my IP Lets you specify the IP information for this telephone.
3 Set SubNMsk When entering an IP address:
4 Set Gatwy IP
5 Set NCP IP Lets you specify the IP address of the Network Call Processor. If
the telephone is on the same subnet as the NCP you never need
to specify the NCP IP address. If the telephone is on a different
subnet, then you must enter this information or provide it by
using DHCP option 184.
When entering an IP address:
6 VCX Config Not used in an NBX environment. NBX telephones can operate
Menu as SIP clients for the 3Com VCX Telephone System. This option
opens a submenu that allows you to set telephone operating
settings for a VCX environment.
7 Spare Reserved for future use.
Using the Telephone Local User Interface Utility
Use the key pad to enter digits 0–9.
Use the left and right soft keys or scroll keys to move the
cursor left or right.
If any of the fields within the IP address contain only one or
two digits, add leading zeros.
Example: Enter 10.234.1.125 as 010.234.001.125
To change a telephone back to its default setting, enter 255
for each octet of the IP address. To clear all configured
settings and return to factory defaults, select menu item AB4.
Press the # key to commit your address change.
Use the key pad to enter digits 0–9.
Use the left and right soft keys or scroll keys to move the
cursor left or right.
If any of the fields within the IP address contain only one or
two digits, add leading zeros.
Example: Enter 10.234.1.125 as 010.234.001.125
To change a telephone back to its default setting, enter 255
for each octet of the IP address. To clear all configured
settings and return to factory defaults, select menu item AB4.
Press the # key to commit your address change.
369