Setting The Space Rear - GRAPHTEC CE7000-130AP User Manual

4
Press the [4] key (PAPER READY TIME).
PAPER REDY TIME setting screen is displayed.
5
Press the POSITION (
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to MEDIA SETTING screen
(3/3).
7
Press the [PAUSE/MENU] key.
It will return to default screen.

Setting the space rear

This setting allows a cross cut to be made from the maximum value of the cut along the X axis based on the rear
margin setting during time out or when making a cross cut across a separator.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/3) is displayed.
) keys to change the current setting.
4-9
Supplement
•
Paper exposure time can be set to 0, 60, 120,
180, 300, 420, or 600 seconds.
•
Cutting/plotting will begin immediately after
the pre feed is complete and data sent during
paper exposure time is received.
Supplement
It will return to MEDIA SETTING screen (3/3)
without changing the settings when you press
the [ESC] key (CANCEL).