Remote Operation
Making Connections for Remote Control
Making Connections for Remote Control
See
Figure 4.1 Location of J1 and S1
Remote
The interlock input may be configured for use with an external voltage free contact.
Connect pins as shown:
Shutdown
Using a
Table 4.1 Analog Pin Connections with a Contact Closure
Contact
Programming Line Pin #
Closure
Closing an external contact across the interlock pins A4/A5 will then enable the unit.
Opening the contact will disable the supply output.
60
Figure 4.1
for the locations of the user and programming lines J1 and S1.
J1-9
J1-8
User Line Pin #
to
J1-12
to
J1-11
Operating Manual for XPR Series Power Supply