Assembly - WAGO I/O-SYSTEM 751-3001 Manual

2.1.1.8 Assembly

1. Mount ground plate on an even surface (machine frame or mounting plate)
2. Place the cables in the cutouts that are marked for this purpose. Make sure
3. Fix the upper part in the snap-in position of the ground plate.
4. Push the upper part onto the ground plate. Tighten screws of the upper part
Fig. 2.1.1-7: Assembly
WAGO-I/O-SYSTEM 751
AS-Interface Components IP67
using sufficiently long M4 cheese-head screws.
that the cables engage behind the locking latch. For modules with unused
AUX socket, insert the enclosed blanking cap to seal the cable entry.
with a tightening torque of 0.9N m. Electrical contact with the conductors
is made automatically.
751-3001 [AS-Interface Module 4IN 24V Single] • 15
Assembly
gqxxx10x