User menu -> Configuration -> Date & time
SNTP Time sync.
SNTP active
Off
On
Manual mode
Set date
Set time
Summer/winter
Automatic
Manual
10.5.3 Edit outputs
Only visible to the administrator.
If your installer has configured the outputs as the "user defined" type and has enabled editing, you can edit
them here.
You can change the following:
• Name of the output
• Polarity
• Continuous or pulse switching
• Schedule
• Event
- Up to 3 events can be assigned and edited.
10. User menu
Sync on start-up
Off
On
Sync daily
Off
On
Manual sync
(synchronises date/time immediately)
NTP server name
ntp.exnet.com*
Name:
ntp.exnet.com
pool.ntp.org*
Name:
pool.ntp.org
<empty>
<empty>
<empty>
(A list of 5 configurable
NTP-server names in order of priority.)