Additional Outputs; Inverting Additional Outputs - Abus Terxon MX Installation Instructions Manual

153 Additional outputs

Additional output 3
154 Additional outputs
Additional output 4
155 Additional outputs
Additional output 5
156 Additional outputs
Additional output 6
157 Additional outputs
Additional output 7
158 Additional outputs
Additional output 8

159 Inverting additional outputs

You can also invert the additional transistor outputs for
different applications. In inverted state, the voltage of
+12V is applied in active state – e.g.: for addressing a
visual signal.
1. On the control unit, enter:
2. The LCD display shows: 159: INV Pgby OFF
3. Via the keypad, select from the following items
and press:
inv Pgby OFF
+12V voltage is removed for activating
00
the output. In deactivated state, the
output is set to +12V.
Inv Pgby ON
+12V voltage is applied for activating
01
the output. In deactivated state, the
output is set to ground.
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
159
79
160 Time-confirmed alarm
To change the settings:
1. On the control unit, enter:
2. The LCD display shows: 160:Confrm t=30
3. Via the keypad, select from the following items
and press:
Bestät=000-999
The timer starts when an alarm has
been triggered for the first time. If
000-
another alarm is triggered before the
999
time has expired then the alarm centre
transmits a confirmed alarm to the
central station (command 89=1)
4. Confirm your input. On the control unit, enter:
.
161 Confirm internal loudspeaker
To change the settings:
1. On the control unit, enter:
2. The LCD display shows: 161:Conf Int OFF
3. Via the keypad, select from the following items
and press:
Conf Int OFF
0
Internal loudspeaker is on for
unconfirmed alarm (command 89=1)
Conf Int OFF
1
Internal loudspeaker is on for confirmed
alarm (command 89=1)
4. Confirm your input. On the control unit, enter:
.
160
161
UK