Wired Outputs - Abus SECVEST Installer Manual

Wired Outputs

Name/function
Number
Name
Type
Status
Attributes
Configuring wired outputs
Note
Secvest has up to four wired outputs.
Editing outputs
1. Click in the line of the desired output.
Note
It is useful to assign unique output names so that
if a fault occurs it is easier to identify the affected
output.
2. Delete the preset name.
3. Assign a unique name for the output with max.
12 characters.
4. Confirm the selection once the configuration is
complete by selecting Submit.
Explanation
The number comprises the component type (wired output) and a consecutive
number.
Unique name of the wired output
Type of the wired output
Current status of the wired output
Attributes of the wired output
Inverting outputs (polarity)
Note
You can choose here whether the function of
the output in question is inverted or not. Select
Normal or Inverted.
Selecting the output type
Note
This selection field also provides the option of
automatically arming or disarming the alarm panel
at a specific time.
An overview of the different output types can be
found in the following table.
1. Select menu item Type.
Configuration
59