14 Revision History
Revision
F1
• Updated SWIRE_SEL connection to VL in
MAY '16
• Added note about options regarding 0402 capacitors to
• Added footnote about measurements with HPF disabled to
• Updated CMRR typical values in
• Updated typical values and Footnote 4 in
• Updated
Table
4-27,
• Added
Section
5.3. "SoundWire Power Sequences."
• Added
Section
5.4,
• Added HPOUT_PULLDOWN to
• Refined wording for
F2
• Updated SWIRE_SEL connection to VL in
AUG '17
• Changed references to VD to
• Updated
Fig. 4-28
• Updated VL/VD_FILT ordering in
• Relabelled the Y axes in
Important: Please check with your Cirrus Logic sales representative to confirm that you are using the latest revision of this document and to
determine whether there are errata associated with this device.
Contacting Cirrus Logic Support
For all product questions and inquiries, contact a Cirrus Logic Sales Representative.
To find the one nearest you, go to
IMPORTANT NOTICE
The products and services of Cirrus Logic International (UK) Limited; Cirrus Logic, Inc.; and other companies in the Cirrus Logic group (collectively either "Cirrus
Logic" or "Cirrus") are sold subject to Cirrus Logic's terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to
warranty, indemnification, and limitation of liability. Software is provided pursuant to applicable license terms. Cirrus Logic reserves the right to make changes to
its products and specifications or to discontinue any product or service without notice. Customers should therefore obtain the latest version of relevant information
from Cirrus Logic to verify that the information is current and complete. Testing and other quality control techniques are utilized to the extent Cirrus Logic deems
necessary. Specific testing of all parameters of each device is not necessarily performed. In order to minimize risks associated with customer applications, the
customer must use adequate design and operating safeguards to minimize inherent or procedural hazards. Cirrus Logic is not liable for applications assistance
or customer product design. The customer is solely responsible for its selection and use of Cirrus Logic products. Use of Cirrus Logic products may entail a choice
between many different modes of operation, some or all of which may require action by the user, and some or all of which may be optional. Nothing in these
materials should be interpreted as instructions or suggestions to choose one mode over another. Likewise, description of a single mode should not be interpreted
as a suggestion that other modes should not be used or that they would not be suitable for operation. Features and operations described herein are for illustrative
purposes only.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR
ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). CIRRUS LOGIC PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN
PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, NUCLEAR SYSTEMS, LIFE SUPPORT PRODUCTS OR
OTHER CRITICAL APPLICATIONS. INCLUSION OF CIRRUS LOGIC PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S
RISK AND CIRRUS LOGIC DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS LOGIC PRODUCT THAT IS USED IN SUCH A MANNER. IF THE
CUSTOMER OR CUSTOMER'S CUSTOMER USES OR PERMITS THE USE OF CIRRUS LOGIC PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES, BY
SUCH USE, TO FULLY INDEMNIFY CIRRUS LOGIC, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL
LIABILITY, INCLUDING ATTORNEYS' FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES.
This document is the property of Cirrus Logic and by furnishing this information, Cirrus Logic grants no license, express or implied, under any patents, mask work
rights, copyrights, trademarks, trade secrets or other intellectual property rights. Any provision or publication of any third party's products or services does not
constitute Cirrus Logic's approval, license, warranty or endorsement thereof. Cirrus Logic gives consent for copies to be made of the information contained herein
only for use within your organization with respect to Cirrus Logic integrated circuits or other products of Cirrus Logic, and only if the reproduction is without
alteration and is accompanied by all associated copyright, proprietary and other notices and conditions (including this notice). This consent does not extend to
other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale. This document and its information
is provided "AS IS" without warranty of any kind (express or implied). All statutory warranties and conditions are excluded to the fullest extent possible. No
responsibility is assumed by Cirrus Logic for the use of information herein, including use of this information as the basis for manufacture or sale of any items, or
for infringement of patents or other rights of third parties. Cirrus Logic, Cirrus, the Cirrus Logic logo design, and SoundClear are among the trademarks of Cirrus
Logic. Other brand and product names may be trademarks or service marks of their respective owners.
Copyright © 2014–2017 Cirrus Logic, Inc. All rights reserved.
DS1083F2
Table 14-1. Revision History
Fig.
2-2.
Table
3-13.
Table
3-15. Added HPOUT pull-down resistance to
Typical Leakage Current during Nonoperational Supply States (with VP Powered
"Page 0x30 Read
Sequence."
Section 6.13
and
Section
7.6.12.
Fig.
2-2.
in
Section
VD_FILT
in
Section 4.8.13
to be more specific.
Section
4.15.
Fig. 4-17
and
Fig. 4-19
www.cirrus.com.
Changes
Section
2.1.1.
Table 3-5
and
Table
Section
7.12.2.
5.8.
in
Section
4.6.3.
14 Revision History
3-9.
Table
3-16.
On)," in
CS42L42
Section
4.15.
182
Need help?
Do you have a question about the CS42L42 and is the answer not in the manual?