Reset The Default Itg Shell Password - Nortel 1000 Description, Installation And Operation Manual

Reset the default ITG shell password

If the ITG shell password is lost, the ITG shell user name and password can
be reset to the default: itgadmin. This procedure requires physical access to
the IP trunk card. This procedure cannot be done through Telnet.
Follow the steps in Procedure 64 to reset the default ITG shell password.
Procedure 64
Resetting the default ITG shell password
1 Connect a terminal to the IP trunk card maintenance port.
2 Press the reset button on the IP trunk card and observe the sequence of
startup messages from the card.
3 Look for the prompt screen to enter the BIOS ROM.
There is a window of only approximately 2-3 seconds to enter the correct
prompt (jkl for the Media Card 32-port trunk card and jkl for the
ITG-Pentium 24-port trunk card).
Example of the Media Card 32-port trunk card prompt screen:
CPU: IXP1200
Version: 5.4
BSP Version: 5.0
Creation Date: Nov 22 2001, 18:21:11
Enter jkl to force boot to BootROM vxWorks prompt
OA&M using the ITG shell CLI and overlays
IP Trunk Description, Installation, and Operation
Page 491 of 644