Nortel 1000 Description, Installation And Operation Manual page 471

OTM 2.1 (and later) OA&M using OTM 2.1 (and later) applications
Figure 143
Determine IP trunk card status
4 In the Retrieve ITG node window, select the OTM Site and Meridian 1
System fields. Select the Meridian 1 Customer number.
Note: The site name, Meridian 1 system name, and Meridian 1 customer
number must exist in the OTM Navigator before a new IP Trunk 3.01 (and
later) node can be added.
5 Enter the management IP address field for Leader 0 or Leader 1 on the
existing node.
6 Enter the SNMP read/write community name. The default is "private".
Note: To retrieve an ITG card, SNMP read community name cannot be
used.
7 Click the Start Retrieve button.
The Retrieve control dialog box displays the results of the retrieval.
The node properties, card properties and dialing plan are retrieved
from the Leader card.
8 Click Close when the download is complete.
9 Refresh the card status and check that the cards in the new node are
responding.To determine the IP trunk card status, in the IP Telephony
Gateway – ISDN IP Trunk window click View > Refresh > All.
Look at the IP trunk card in the bottom window and see what is under the
title "Card State". See Figure 143.
End of Procedure
IP Trunk Description, Installation, and Operation
Page 471 of 644