Nortel 1000 Description, Installation And Operation Manual page 442

Page 442 of 644
Figure 127
Select the Dial Plan
553-3001-363 Standard 2.00
Provisioning IP Trunk 3.01 (and later) in OTM 2.1 (and later)
12 Click the Digits dialed tab. The Add button is inactive until values are
entered in the Dial plan digits field.
On the Digits dialed tab, enter the dial plan information for this node.
13 From the Dial Plan drop-down list, select the correct dial plan/type of
number selection. See Figure 127 on
14 Enter all of the numbers that must reach this node.
September 2004
page 442.